Stainless Steel Grades & Specifications
Find the right grade, finish and dimensions for your stainless steel sheets, plates and coils. FSJS supplies 200, 300 and 400 series materials with cut-to-length, slitting and custom processing options.
Explore stainless steel by series
Grade selection depends on corrosion conditions, forming requirements, magnetic properties, appearance and cost. The summaries below are general procurement guidance; final suitability depends on the application and the applicable specification.
201 & 202
Cost-conscious austenitic grades often considered for indoor fabrication, kitchenware and general sheet-metal work where the environment and forming requirements permit.
- Typical request: 201, 202 or specific 201 variants
- Confirm chemistry and intended forming depth
- Consider exposure to moisture and chlorides
304 & 316/316L
Widely specified austenitic grades. 304 is commonly used in food equipment and fabrication; 316/316L is often chosen when higher resistance to certain corrosive environments is required.
- Common forms: sheets, plates and coils
- Multiple surface finish options
- Confirm test certificate and project standard
410 & 430
Ferritic and martensitic grades used for suitable appliance, equipment and fabrication applications. Properties and processing behavior differ from austenitic grades.
- 430: ferritic, generally magnetic
- 410: martensitic, properties depend on condition
- Confirm application and processing route
Popular stainless steel grade comparison
A practical overview to support your initial enquiry. These descriptions are not a substitute for a project specification, certificate or technical evaluation.
| Grade | Series / Structure | Common Uses | Selection Notes |
|---|---|---|---|
| 201 | 200 / Austenitic | Indoor products, general fabrication, kitchenware | Check composition, environment and forming grade |
| 202 | 200 / Austenitic | Fabrication and selected formed products | Confirm specifications and required corrosion performance |
| 304 | 300 / Austenitic | Commercial kitchens, fabrication, food equipment | Versatile general-purpose grade; verify finish and tolerance |
| 316 / 316L | 300 / Austenitic | Selected marine, chemical and demanding environments | Grade choice depends on exposure and fabrication conditions |
| 410 | 400 / Martensitic | Selected equipment and fabricated components | Condition and heat treatment affect properties |
| 430 | 400 / Ferritic | Appliances, panels, indoor decoration | Generally magnetic; not interchangeable with 304 |
Common specifications and finishes
FSJS focuses on stainless steel flat products. Below are frequently requested dimensions and finishing options. Actual stock, mill tolerances, minimum order quantity and production feasibility are confirmed against each enquiry.
Sheets & Plates
- Common thicknesses: 0.30, 0.40, 0.50, 0.60, 0.80, 1.00, 1.20, 1.50, 2.00 mm
- Typical dimensions: 1000 × 2000 mm, 1219 × 2438 mm (4 × 8 ft), 1219 × 3048 mm (4 × 10 ft)
- Supply options: Cut-to-length, leveling, protective film and customized sheet sizing
Coils & Slit Strips
- Common master coil widths: 1000, 1220, 1240 and 1250 mm
- Custom slit widths: Narrow and intermediate widths subject to order and processing feasibility
- Supply options: Master coils, slit coils and processed coils with packing requirements
Surface Finishes
- 2B, BA, No.4 and hairline (HL)
- Mirror finishing, sandblasting and patterned / embossed options
- Decorative coloring and anti-fingerprint coating on request
Quality & Documents
- Grade, thickness tolerance and surface requirements confirmed before production
- Material Test Certificate (MTC) and inspection documentation when agreed
- Export packing and shipping documents according to confirmed order terms
Processing matched to your order
Our flat-product processing services help buyers receive stainless steel in the dimensions and finishes needed for subsequent fabrication.
Coil width customization with edge and winding requirements agreed before processing.
Coils processed into sheets at agreed lengths with leveling where required.
Brushed, polished and decorative finishes based on project specifications.
Protective film, moisture protection and reinforced packing selected for shipment needs.
Frequently asked questions
How do I choose between 201, 304 and 316 stainless steel?
Describe the operating environment, end use, fabrication process and required standard. 201 may suit certain indoor applications; 304 is widely specified for general fabrication; 316/316L is often evaluated for more demanding corrosion conditions. Final selection should match your technical requirements.
Can you supply a specific actual thickness?
Yes, thickness requirements can be reviewed against available stock and mill or processing capability. Include nominal thickness, minimum/maximum acceptable thickness and the measurement method in your enquiry.
Do 2B, BA and No.4 indicate different grades?
No. They describe surface conditions rather than the material grade itself. Grade and finish should be specified separately, for example 304 2B or 430 BA.
Can you provide test certificates?
Material Test Certificates or other documentation can be discussed when quoting. State the exact certificate standard and any third-party inspection needs before order confirmation.
What details should I provide for a fast quotation?
Please send product form, grade, thickness, width, length or coil size, finish, quantity, destination and any tolerance or packing requirements.
Need the right grade for your order?
Share your material grade, thickness, dimensions, surface finish, quantity and destination. Our team will review the requirements and prepare a quotation.