Category: Technical Guides

  • 2B, BA, No.4, Hairline or Mirror: Which Stainless Steel Finish Should You Specify?

    2B, BA, No.4, Hairline or Mirror: Which Stainless Steel Finish Should You Specify?

    Technical Guides / Buying Advice

    2B, BA, No.4, Hairline or Mirror: Which Stainless Steel Finish Should You Specify?

    The right finish affects appearance, fabrication workflow and how buyers should inspect the delivered material.

    Five finishes buyers commonly ask about

    2B: A smooth cold-rolled mill finish, often used as a practical base for fabrication or further finishing.
    BA: Bright-annealed, typically brighter and more reflective than 2B, but not identical to a mechanically polished mirror.
    No.4: A directional satin polish; appearance depends on abrasive process and agreed reference.
    Hairline (HL): A long, continuous directional brushed effect used in visible panels and trim.
    Mirror / 8K: A highly reflective polished finish, where handling and scratch protection become particularly important.

    Why a finish name is not enough

    “No.4” and “hairline” may look different from one supplier or batch to another. Before purchasing visible material, agree on a physical sample or approved photos, grain direction, acceptable scratches, reflectivity expectations and whether one or both sides need finishing.

    Protective film is part of the discussion

    The film selection should match the finish, storage period, processing and removal conditions. Highly reflective material may require additional care. Adhesive film can age with heat, sunlight and storage time, so agree on film type and practical removal timing.

    How FSJS supports finishing orders

    We handle standard stainless steel sheets and coils and offer several surface-processing options, including brushing and polishing. Decorative and colored finishes are additional options when the project calls for them; material grade and dimensions remain the starting point.

    Buyer takeaway

    When appearance matters, specify the finish, approved reference, grain direction and film expectations in the order—not only the finish abbreviation.

    Need help specifying stainless steel?

    Send us your grade, thickness, dimensions, surface finish, quantity, application and delivery destination. Our team can review the available material and processing options before quotation.

    Request a Quote →

  • Material-Selection

    Material-Selection

    Technical Guides / Buying Advice

    How to Choose the Right Stainless Steel Grade: 201, 304, 316 or 430?

    Stainless steel grades should be selected around the end-use environment, not only the lowest price.

    Start with the application, not the grade number

    Two buyers may both request stainless steel sheet but need very different performance. Before comparing quotations, clarify whether the material will be used indoors, near the coast, in a food-contact environment, or as a formed component. Exposure, cleaning chemicals, expected service life and local requirements all affect selection.

    What the common grades mean

    201: Often considered for cost-sensitive indoor products where the service environment and fabrication process are suitable. Its corrosion performance is generally less robust than 304 in demanding conditions.
    304: A widely used general-purpose austenitic grade for equipment, kitchen-related fabrication and architectural products under suitable conditions.
    316 / 316L: Contains molybdenum, which improves resistance to some chloride-related corrosion situations compared with 304; it is not corrosion-proof.
    430: A ferritic, generally magnetic grade frequently selected for suitable indoor trim and appliance uses; it has different forming, welding and corrosion characteristics from 304.

    Do not overlook fabrication

    Deep drawing, bending, welding and polishing can change what grade or condition is practical. For example, a designation such as “201” alone does not describe all deep-drawing performance. Ask about forming severity, temper/condition and the intended tooling before confirming a substitute.

    What to send us for a useful quotation

    Share the application, grade or acceptable alternatives, thickness, width/length, surface finish, quantity, destination and any mandatory standard. If the environment includes salt spray, chemicals or sustained moisture, mention it early so the material selection can be reviewed.

    Buyer takeaway

    A lower unit price is only worthwhile if the material performs adequately in the final application. When requirements are uncertain, sample testing and customer-side design approval are sensible steps.

    Need help specifying stainless steel?

    Send us your grade, thickness, dimensions, surface finish, quantity, application and delivery destination. Our team can review the available material and processing options before quotation.

    Request a Quote →